When your GE refrigerator isn’t working, it’s time to call for a repair. Here are some fundamental problems to look out for, including the evaporator fan motor not working, the Water supply tube is frozen, and the Control board malfunctioning. You can also get help from It’s Fixed, which offers same-day GE refrigerator repairs.
Table of Contents
The evaporator fan motor is not working
If you are experiencing problems with the evaporator fan motor on your Ge refrigerator, you may consider replacing it. This repair is relatively simple, but if you do not replace it immediately, it could lead to more damage. To replace it, you must take it apart and unscrew the mounting bracket to reach the motor. You can then remove the motor and replace it with a new one.
Before replacing the motor, it is essential to check its electrical and physical condition. You can use a digital or analog multimeter to determine the exact voltage. First, make sure the tester is set to the AC voltage function. The tester should be connected to the refrigerator’s power plug but not touching it. If the tester reads zero volts, the evaporator fan motor does not have voltage and must be replaced.
Another sign of a failing evaporator fan motor is a noisy motor. When this happens, you will hear a clicking/tick-tock noise. The evaporator fan’s grommet may also cause noise. This grommet will cause excessive noise and vibrations.
The ice maker is not working.
The ice maker in your GE refrigerator may not work for some reason. You may want to check the on/off switch, ice reservoir, ice tray, and water inlet valve to troubleshoot this problem. Also, look for any damage to these components. If you haven’t found a solution to this problem yet, contact GE customer service for further assistance.
The ice maker may be blocked due to frequent use. Another possible cause may be that the icemaker’s mechanical arm may be stuck. If so, you may need to replace it. Also, it’s essential to keep the internal temperature of your GE refrigerator at a proper level for the ice maker to function correctly.
Firstly, check the temperature of the freezer compartment. If the freezer is too warm or too cold, the ice maker may not start. The ideal temperature for the freezer compartment is between zero and fifteen degrees Fahrenheit. If the freezer is too cold, frost can form and prevent ice from dispensing.
The water supply tube was is frozen.
When the water supply tube in your GE refrigerator freezes, the water will not reach the ice maker or dispenser. If this happens, you can manually defrost the freezer or use a hair dryer to thaw the water line. If this method fails, contact GE Cares for help.
The frozen water line is a common problem with side-by-side refrigerators, especially GE refrigerators. One of the leading causes is a problem with the insulation in the door. Moisture can prevent the door from adequately insulating the water line, causing it to freeze. Another cause is a problem with the temperature in the freezer. You can use a thermometer to check the freezer temperature to determine the proper temperature. If the temperature is too cold, you should turn the temperature control to a warmer setting.
Another possible cause of a frozen water line is a problem with the water dispenser in a GE refrigerator. It can freeze if the freezer is too cold or the food is not loaded correctly. The water dispenser in a GE refrigerator needs a minimum water pressure of 20 psi from the main plumbing supply. If you’re experiencing low water pressure, you’ll need to increase the water pressure in the refrigerator to avoid a problem. If you’re unsure how to check the water pressure, you may need to contact the local water department or a licensed plumber.
Control board malfunctioning
If the control board of your GE refrigerator is malfunctioning, the first thing to do is replace the faulty board. You can replace the control board by yourself or call a professional. The control board is located on the back panel of your refrigerator. To replace it, unscrew the back panel of your refrigerator. Then, unscrew the screws that secure the back panel and pull the frame out. Next, remove the back panel and examine the control board. It should have two wires connected to it.
A faulty control board can also create a non-working display on your refrigerator. Depending on the model of your GE refrigerator, you may be able to identify the control board by looking at the sticker located on the back of the refrigerator. It should be labeled WR55X10956.
Symptoms of a faulty control board include inconsistent cooling, ice melting, and wide temperature variations. When a faulty control board is to blame, it is best to get it replaced.
