Table of Contents
You may be wondering how to install a ring doorbell. It would help if you kept a few things in mind, such as uneven surfaces and battery power. In addition, you should be sure to level the faceplate. After you have done this, you can proceed to install the device.
Before installing your Ring doorbell, you should determine where it will be placed in your home. Ideally, it would help if you placed it at a height that provides a good field view. Then, using a level tool, you can adjust the mounting bracket accordingly. You can also use the faceplate as a template to mark the four mounting points, including the middle one for the indoor power adapter.
When installing a new doorbell, ensure the battery is fully charged before you begin the installation. You should then turn off the red charging light and slide the battery compartment back into place. You should hear a click to confirm that the battery is installed correctly. Next, you should connect the Ring doorbell to your home’s power supply. You should also disconnect the existing doorbell wires, if applicable.
Once you have the device, you should connect it to your Wi-Fi network. After successfully connecting the Ring doorbell to your Wi-Fi network, you should use the included smartphone app to set up the different features. The app will also allow you to customize the motion sensor’s range.
Plugging the Ring Doorbell into your home will take a few moments to power on. After a few seconds, the device should begin to talk to you. The Ring app makes it easy to set up the device. To do this, you must select the app’s Setup option. Then, the app will take you through the setup process step-by-step.
Some tips will make installing your ring doorbell easier, especially on an uneven surface. First, you should ensure that the surface where the doorbell is mounted is flat and not too bent. Then, you need to use screws that have flat heads. Also, you need to ensure that the screws don’t touch the cables.
If the surface is not flat, you can use an angle kit to install your ring doorbell. This way, you can ensure a more comprehensive view from the camera. The installation kit also comes with special tools for uneven surfaces. If the surface isn’t level, you can always use double-sided tape or adhesive to help make the installation easier.
The installation kit for the ring doorbell usually includes numerous T6 screws and a T6 tip screwdriver. It also includes a mounting bracket. However, this method isn’t recommended if the surface is PVC or masonry. You can also use a self-tapping screw instead. This method is suitable for most types of surfaces and works for all doorbell versions.
When mounting the ring doorbell, you must ensure it’s at least 48 inches above ground level. This will ensure that you can see if the doorbell is ringing. In addition, you need to make sure the surface is flat against the surface. If the surface is not flat, the ring doorbell will not work.
The Ring doorbell uses a battery that should last about six months. It will help to copy a spare battery in case you run out. Before installing your doorbell, remove the faceplate and insert the level tool (small orange bar with fluid inside). You should place the device 4 feet above the ground, at chest height, with the bubble dead center.
The Ring doorbell is a battery-powered doorbell that detects motion and alerts its owner. It features a microphone and a camera. You can use the included micro-USB cord to recharge your doorbell when the battery is low. However, it is recommended that you use a 2.1 amp wall charger to extend the battery life.
The Ring Video Doorbell 2 is compatible with both hardwired and battery-powered installations. It also has a removable rechargeable battery that can be charged by plugging in the included power adapter. The red status light will illuminate if the battery has been fully charged. The doorbell will then continue to operate for the rest of the day.
When using a battery-powered Ring doorbell, you should charge the device until it reaches 100 percent. If the weather is cold, however, the battery may not hold a charge as well as it would in warmer temperatures. Therefore, if you live in a cold climate, you should consider using a Ring Doorbell Elite or Pro instead.